home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / dcom / modems-part1 / 2318 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  1.5 KB

  1. Path: nntp.teleport.com!usenet
  2. From: curt@teleport.com (Curt...)
  3. Newsgroups: comp.dcom.modems
  4. Subject: Re: SYS.INI Parameters for WIN95
  5. Date: Mon, 22 Jan 1996 17:17:52 GMT
  6. Organization: Teleport - Portland's Public Access (503) 220-1016
  7. Message-ID: <3103c458.25006433@news.teleport.com>
  8. References: <31026f38.16932189@news.atcon.com>
  9. NNTP-Posting-Host: ip-pdx17-10.teleport.com
  10. X-Newsreader: Forte Agent .99c/16.141
  11.  
  12. thomed@atcon.com (Edward Thompson) wrote:
  13.  
  14. > What modem parameters are required in sys.ini when running WIN95.  I
  15. > have searched Jnavas and Curts pages but they are not too clear to me
  16. > if the parameters they recommend are for 3.1/3.11 only or also for
  17. > WIN95.  In particular I am interested in:
  18. > COMnFIFO
  19. > COMnBUFFER
  20. > COMBoosttime
  21. > COM2RxTrigger
  22. > I will appreciate any advice on the values for these parameters and
  23. > vonfirmation if they are required under WIN95.  If it makes a
  24. > difference, I am using a USR Sportster 28,800
  25. > Thank you in advance for your advice and assistanceI 
  26.  
  27.  
  28. Win95 has a comm architecture which is much different than older
  29. Windows.  I've been watching the conferences, and so far have not
  30. seen much advice about making any changes from the Win95
  31. default comm setup.  Until the power users hammer out some 
  32. Win95 comm tips and tricks, I'd leave things alone (especially
  33. if your are not having any problems).
  34.  
  35. Best wishes,
  36. Curt...
  37.  
  38.  
  39. _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
  40.          Curt's High Speed Modem Page:
  41.  http://www.teleport.com/~curt/modems.html
  42. _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/     
  43.